Tips in Concrete Preparation for Concrete Resurfacing

1. Make Sure That it is Clean

Grime, dust and dirt could actually keep the coating of the concrete from adhering accordingly to the concrete surface. Sweep off loose dirt away from concrete surface. Then, pressure wash the surface of the concrete in order to get rid of the hard-sticking ones. And if there are some grease or oil on it, put some sawdust on the surface, leave it for quite some time like overnight, and then, you may sweep it off the following day. Sawdust is very effective in absorbing oils and grease.

In addition to that, you should also make sure the concrete slab is totally dry prior to applying the coating. Basically, air-drying is greatly recommended however, only if you have the abundance of time before the installation procedure. If not, one method to hasten the drying procedure is by the use of your electric fan in order to dry it.

2. Observe Properly

This simply means it shouldn’t have any huge damage which could affect how much it would hold out after the concrete coating has been done. One method to know if the steel within the slab has already been rusted is to check small cracks for some rusted-colored stains. It usually appears like liquid rust coming out from the tiny cracks.

Any issue or blemish on the concrete surface should be addressed and taken care of. Brittle layers should be ground off, small cracks should be filled, and the source of the moisture problems should be dealt with accordingly.

No matter what kind of concrete overlay or coating you intend to utilize, the slab should be in the perfect shape to make it stick effectively. If you are not sure of the correct way to prepare and clean it, do not hesitate to consult to a professional concrete service provider who has the expertise and right knowledge in the field. Furthermore, they must be able to assess and inspect the present situation of the concrete and prepare it until it’s already suitable for resurfacing.

3. Precautions to be Followed Before a Commercial Floor Resurfacing Project

One of the most realistic and cost-efficient investments business owners choose to have nowadays is the resurfacing project. If you are one who’s having a new coating or overlay installed, it is very important that you take certain precautionary measures in preparing the portion you wish to be resurfaced. You don’t just hire professionals and let them begin the preparation of the area by themselves. While some concrete service providers are good enough to do extra effort for you, some may not be too considerate and would charge you for additional services. Since you already know your commercial property well, it is highly suggested that you do preparatory methods which would make sure the success of the concrete installation and also, to prevent further damage to your commercial property.

4. Clear the Area

Get rid of all the things on the flooring you want to resurface. This includes equipment, appliances, electronic devices, furniture and anything else you may have. Concrete a professional concrete St George Utah if you want to know more about concrete works.

Leave a Reply

Your email address will not be published. Required fields are marked *